Page 258 - catalgo33

specIAl GAGInG

outsIde And InsIde dIAMeter GAGes
Individually designed and built for each application,
these gages have a low-friction bushing direct-transfer
mechanism and will repeat within one graduation.
It is made of aluminum for light weight and to preserve the
proper "feel". Gage contacts and rest feet are carbide for
long wear.
Special GaGinG The steel tube master has carbide rests and pads for Angled outside Diameter Gage with Setting Master
accuracy and wear control.
Shown here is an angled outside diameter gage in position
on the setting master to set the indicator to zero.
This specific gage was designed to measure the diameter
on conical parts.

InsIde dIAMeter GAGe
Inside diameter gage, moderately deep reach. Design
permits inside measuring, while clearing hub obstructions.
(Conventional straight bar would be used otherwise).

MultI-reAdout And specIAl purpose GAGes
This complex five-station fixture gage checks critical dimensions and geometry of
precision cylinders.
This single fixture checks overall length to ±.010", squareness and parallelism of the
ends to within .002", longitudinal bow to within .005", out-of-roundness to within .003"
T.I.R, and wall thickness to within ±.003".
The gage includes micrometer head height adjustment of the work-staging V-rests.
It has precision ball slide mounts for dial indicators at two of the stations and wear-
resisting carbide contacts at all gaging stations.

Inserting ceramic cylinder in gage to check squareness and
parallelism of ends, longitudinal bow and out-of-roundness

258