Page 100 - catalgo33

vernIer cAlIpers

123, 123M, 123eM MAster vernIer cAlIpers lonG-lIfe And AccurAcy feAtures
0-72" AND 0-24"/0-600MM • Fine tool steel construction makes the jaws harder and
longer-wearing than stainless tools. All tools through
Ultimate example of slide caliper design. It is more accurate, has the easiest 24" (600mm) also have hardened and stabilized bars.
reading vernier style, is stronger and offered in much longer lengths than other
slide calipers. • Hardened, ground and lapped measuring surfaces
• Machine divided graduations for accuracy
reAdAbIlIty feAtures • The combination straight and angular ways on the
Slide CaliperS • The open-face design of the slide allows both the inside and outside • Sizes through 24" have divider points on the back side
• Long 50-division vernier scales permit half as many bar graduations as
master bar allow for positive alignment of graduations
conventional single-vernier tools. These widely-spaced graduations make
and easy adjustment of the flush-fitting verniers
it easy to read to .001" or 0.02mm
to accurately set dividers and trammels
vernier scale on the same side, thus allowing both verniers to be read
without turning the tool over
same bar have outside readings only. (Inside readings
• Black lines and figures against the Starrett satin chrome finish make • Tools with inch and millimeter graduations on the
must be compensated for by adding the nib width to
reading a pleasure, not an effort the indicated reading.)
• Screw-type adjusting nut allows for fine measuring adjustments and lock • The longer length of the adjusting jaw slide provides a longer
nut holds measurements bearing surface on the master bar, ensuring squareness
with the solid jaw and extra resistance to springing
• Tight, smoothly fitted slides for maximum accuracy
and easy adjustment
• Fitted wood case option

123EM-6

100