Page 43 - catalgo33

Mul-t-AnvIl MIcroMeters

220 Mul-t-AnvIl MIcroMeters reAdAbIlIty feAtures
0-2"/0-50MM • Starrett satin chrome finish – no glare – resists rust
• Advanced sleeve design with staggered lines and
This tool was a new development in micrometer design and patent is held by
Starrett. This micrometer will handle a wide variety of measurements impossible distinct figures for precise and easy readability
to obtain with regular micrometers, such as measuring the wall thickness of • Quick-reading figures – every thousandth numbered
tubing, cylindrical walls from a hole or slot to an edge, many hard-to-reach on inch tools
locations, and the thickness of screw heads, shoulder lengths, etc. eAse-of-HAndlInG feAtures
This micrometer can be furnished with .0001" graduations, but we recommend • Balanced frame and thimble design ensure easy
.001" or 0.01mm for easier and more accurate readings. The Starrett Company, handling, better readability
with our years of experience, recommends this because the anvils on this type of • Ring-type knurled lock nut for quick and sure locking
tool are not backed up by a frame as in a regular micrometer and could bend slightly. • A choice of friction thimble or combination ratchet/ MicroMeters
speeder for uniform pressure
• Interchangeable anvils are rigidly held in the vise
220 Mul-T-Anvil Micrometers with Round and Flat Anvils and Carbide Faced Spindle
Ratchet Stop, Lock Nut Friction Thimble, Lock Nut type frame and quickly interchanged by a single lock
Cat. No. EDP Cat. No. EDP Range Graduation screw adjustment
220XRL-1 66430 220XFL-1 50746 0-1" .001" • Two hardened anvils furnished – round anvil
220MXRL-25 65050 0-25mm 0.01mm approximately .120" diameter (3mm) and flat anvil
220ZZ-1 55209 Deluxe Case Only
220M Mul-T-Anvil Micrometers With Round and Flat Anvils, Carbide Faced Spindle and approximately .125" (3mm) and .060" (1.5mm) thick
234B-1" or 234MB-25mm End Measuring Rod or Standard • "V" Anvil for measuring thickness of screw heads and
Ratchet Stop, Lock Nut Friction Thimble, Lock Nut Range Graduation shoulder lengths available separately
Cat. No. EDP Cat. No. EDP
220XRL-2 66432 220XFL-2 66433 1-2" .001" • Accommodates special anvils up to 5/16" (8mm) thick
220MXRL-50 66434 25-50mm 0.01mm • Can be used as a height gage by removing the vise jaw
220ZZ-2 55210 Deluxe Case Only AccurAcy And lonG-lIfe feAtures
V-Anvil only: Order PT13017, EDP 71399
1" and 25mm models sent in fitted case. • Rigid one-piece frame of drop forged steel
2" and 50mm models packed one in a box without case.
• Extremely hard and stable one-piece spindle (the heart
of our accuracy)
• Quick and easy adjustment
• Tool is accurate to ± .0002" or ± 0.004mm

220XRL-2

starrett.com 43