Page 114 - catalgo33

vernIer HeIGHt GAGes

254, 254M MAster vernIer HeIGHt GAGes eAse-of-HAndlInG feAtures
0-72"/0-900MM • Quick-adjust release on the slide allows for fast positioning
• Extremely fine adjustments by a knob on the base
254eM MAster vernIer HeIGHt GAGes isolating the column and slide from external pressures
• Additional remote fine adjustment located on top of
0-24"/0-600MM
the bar for sizes 36" (900mm) and larger
This Master Vernier Height Gage is an accurate, rugged and reliable tool that gives • Special master bar design and the balanced design
precise and dependable measurements over long ranges. It has an easy-to-read
HeigHt gages reAdAbIlIty feAtures • Master bars on models up to 24" and 600mm are
and weight of the base eliminates vibration
vernier, is stronger, and is offered in greater ranges than other height gages.
hardened and stabilized
• Long, 50-division vernier scales permits half as many bar graduations as
• Base is hardened, ground, and lapped square with the
single vernier tools. These widely spaced graduations provide easy reading
bar and has finger grooves to provide ease of movement
to .001" or 0.02mm
• Flush fitting of the vernier scales to the main scale eliminates parallax • Vertical bar is positioned near the center of the base
for balance and stability
• Vernier scales are adjustable • Versatile tool will scribe lines, mount dial indicators or
• Black lines and figures against Starrett satin chrome finish make reading easy electronic probes, and accept depth attachments
• Scriber and base are designed for direct reading from zero (bottom of base) • Tool can also be used with our 359 Protractor for
checking angles
254 Master Vernier Height Gages (.001" Graduation)
Cat. No. EDP Range Approximate Base Dimensions
254Z-12 51219 0-12" 5-7/8" x 3-7/8"
254Z-18 51220 0-18" 7-1/2" x 4-1/2"
254Z-24 51221 0-24"
254Z-36 51222 0-36"
254Z-48 51223 0-48" 10" x 6-1/2"
254Z-60 56183 0-60"
254Z-72 56184 0-72"
254M Master Vernier Height Gages (0.02mm Graduation)
Cat. No. EDP Range Approximate Base Dimensions
254MZ-300 56214 0-300mm 150mm x 95mm
254MZ-450 56215 0-450mm 190mm x 115mm
254MZ-600 56216 0-600mm
254MZ-900 56217 0-900mm 250mm x 165mm Quick-adjusting screw release allows rapid
254EM Master Vernier Height Gages (.001"/0.02mm Graduation) slide movement to desired area, then precisely
Cat. No. EDP Range Approximate Base Dimensions position with the fine adjustment knob
254EMZ-12 51224 0-12"/300mm 5-7/8" x 3-7/8"
254EMZ-18 51225 0-18"/450mm 7-1/2" x 4-1/2"
254EMZ-24 51226 0-24"/600mm
Accessories for 254, 254M and 254EM Master Vernier Height Gages
Part No. EDP Description
PT22357 12295 Auxilliary Straight Carbide Scriber
PT28131 67007 Auxilliary Circular Carbide Scriber
PT05409A 51227 Depth Gage Attachment
Hardened bars on all sizes through 24" and 600mm
Furnished with Auxilliary Straight Carbide Scriber. Shown with optional Auxilliary Circular Carbide Scriber.

Precise positioning with fine-adjustment knob
on the base isolates column and slide from
external pressures

254Z-12

114